Austria
Summary
The OIB is a performance-based code that requires a mandatory energy frame calculation to establish the expected primary energy consumption of residential and non-residential building as well as existing buildings undergoing renovation (25-38% higher than new builds). The allowable primary energy frame depends on the type of building and the ventilation system used (stricter requirement for ventilation systems using heat recovery). The code addresses thermal envelope requirements and energy using systems in the calculation, including, HVAC, hot water, lighting and bio-climatic design.
Austria has had prescriptive energy efficiency requirements for buildings within each of the 9 regions (Lander) since the 1970’s. The first nationwide performance-based code was introduced in 2006, to be individually implemented by each of the Lander. The latest 2011 code and supporting policies encompass many dynamic aspects including, air-tightness testing, thermal bridging considerations, well-established EPC programs and incentive schemes, voluntary low energy classes and the implementation of Passive House standards by 2015 for residential buildings.
General information
Remit Code
Coverage
-
Residential buildings
- One family
- Multiple family buildings
- Other buildings
-
Commercial buildings
- Offices
- Retail and wholesale
- Hotels
- Hospitals
- Educational buildings
- Other buildings
- Industrial buildings
- Large Cities
- All urban buildings
- Rural buildings
-
GBPN Climate Classification
- Cooling Based
- Heating Based
- Warm and Humid
- Mixed
Type of Building Code
Type of Building Code
- Cooling Based
- Prescriptive Codes
- Trade Off
-
Performance Codes for Refurbishments
The OIB is a performance-based code that requires a mandatory energy frame calculation to establish the expected primary energy consumption of residential and non-residential existing buildings undergoing renovation (25-38% higher than new builds).
-
Performance Codes for New Builds
The OIB is a performance-based code that requires a mandatory energy frame calculation to establish the expected primary energy consumption of residential and non-residential building as well as existing buildings undergoing renovation (25-38% higher than new builds).
- Energy Declaration
- Model / reference Building
- Mix of different models / Hybrids
Energy Covered
Basis for Energy Requirements
- Overall performance frame
- Final Energy
- Primary Energy
- Life Cycle Assessment considered (embedded energy)
Energy Uses and Functions Covered by the Code
-
Heating
All building types - maximum of 54.4 [kWh / m2a] heating demand for residential buildings and maximum of 18.7 [kWh / m³ a] heating demand for non-residential buildings
-
Cooling
Non-residential only
- Dehumidification
- Ventilation
-
Airtightness
n50 is 3.0 & n50 is 1.5
-
Thermal bridging
Designs should be planned and constructed so that thermal bridges be minimized. In the case of two-dimensional thermal bridges must be maintained in new construction and major renovation of the ÖNORM B 8110-2.
-
Hot water
Included in overall calculation.
- Technical installations
-
Lighting
Included in overall calculation.
- Appliances
-
Design, position & orientation of building
Included in overall calculation.
-
Heat recovery
Included in overall calculation.
-
Passive solar
Included in overall calculation.
- Passive cooling
-
Natural ventilation
Included in calculation
- Solar protection
-
Daylighting requirements
Included in calculation
-
Renewable Energy (solar, PV, others)
When constructing new buildings with a net floor area of more than 1000 m2, alternative systems are used, unless this is technically, environmentally and economically efficient. Alternative systems are a) energy supply systems based on renewable energy sources, b) combined heat and power plants, c) district and refrigeration, d) heat pumps and e) fuel cells.
- Local renewable sources
- Energy Offsets/Green Certificates
Enforcement
Type of Enforcement
- Local enforcement
- Third party inspection
- Central enforcement
- Accreditation of applicants
-
Post Occupancy control
Not known at this stage.
On-site Inspections Occur
- On-site inspections
- During construction
- Post completion
-
Post occupancy
Not known at this stage.
Certification to Support Enforcement of Code
- Energy Performance Certificate support BC
- Positive labeling for building beyond the minimum BC level
-
Existence of EPC register database at national level
Data held individually by each region up until 2011. Centralised system had been introduced recently -
Inspection of boilers
The mandatory inspection report includes little information, comprehensive inspection reports will be introduced in the 2012 EPBD recast. -
Inspection of HVAC systems
The inspection of air-conditioning (A/C) systems is still at an early stage.
Penalties for Non-compliance
-
None
Not known at this stage -
Fine
Not known at this stage -
Imprisonment
Not known at this stage - Refusal of permission to occupy
- Refusal of permission to construct
- Demolition
Measures Supporting Enforcement
-
Commissioning requirements
Boilers and HVAC systems are required to be commissioned. - Airtightness testing required prior to compliance
- Mandatory Computer Modeling
-
Training of Inspectors
Qualified experts are not obliged to attend recognized courses, but these are offered (see also chapter 2 “quality assurance” for experts issuing EPCs) and also used to a large extent: at least 1,500 experts already profit from the knowledge and the experience of others. - Other
Values for New Buildings
Residential Buildings
Mean | Min | Max | |
---|---|---|---|
HDD (°C) | 3089 | ||
CDD (°C) | 370 |
U-Value (W/m²K) | |||
---|---|---|---|
Roof | 0.2 | Roof2 | - |
Wall | 0.35 | Wall2 | - |
Floor | 0.4 | Floor2 | - |
Window | 1.4 | Window2 | - |
Other | 1.4 | - | - |
Overall U-Value | - | - | - |
Window1 | Window2 | |
---|---|---|
G Value/SHGC | ||
Visible Transmission | ||
Percent |
Other Requirements Set for
- Thermal bridge demands
- Ventilation requirements (Electricity consumption for air transportation?)
-
Pressure testing for ducting
Not known at this stage.
- Domestic Hot Water COP - Heat Pump
- Value for airtightness
- Requirements for heat recovery
- Technical HVAC systems
- Requirements for efficient lighting
Energy Performance Requirements
-
Energy performance value
Residential, 66kWh/m2a OR 58.5 for buildings with ventilation system including heat recovery, Non-residential, 22.75kWh/ m3a OR 20.75 for buildings with ventilation system including heat recovery.
- Energy unit
Non-Residential Buildings
Mean | Min | Max | |
---|---|---|---|
HDD (°C) | 3089 | ||
CDD (°C) | 370 |
U-Value (W/m²K) | |||
---|---|---|---|
Roof | 0.2 | Roof2 | - |
Wall | 0.35 | Wall2 | - |
Floor | 0.4 | Floor2 | - |
Window | 1.4 | Window2 | - |
Other | 1.4 | - | - |
Overall U-Value | - | - | - |
Window1 | Window2 | |
---|---|---|
G Value/SHGC | ||
Visible Transmission | ||
Percent |
Other Requirements Set for
- Thermal bridge demands
- Ventilation requirements (Electricity consumption for air transportation?)
- Pressure testing for ducting
- Domestic Hot Water COP - Heat Pump
- Value for airtightness
- Requirements for heat recovery
- Technical HVAC systems
- Requirements for efficient lighting
Energy Performance Requirements
- Energy performance value
- Energy unit
Code History and Future Targets
-
Are stakeholders informed of future targets far in advance?Yes
Zero Energy Targets
- Definition of nZEB/ZEB/Plus Energy etc
- Are all end uses considered in the target?
- Is there a realistic roadmap towards ZEB
-
National Target date for nZEB
2018 public buildings, 2020 all other buildings.
- Special Requirements for public buildings
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Multiple Sets of Data
-
Levels beyond minimum
Low energy buildings, annual heating energy consumption below 60-40 KWh/m2 gross area (30 % above standard performance) or Passive building = Feist passive house standard (15 kWh/m2 per useful area (Styria) and per heated area (Tyrol).
- Year historic or aspirational codes (planned)
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Actual level of Energy Consumption in Target
-
Relative target in percent
Not known at this stage.
- Levels set in energy frame
- Levels set in primary energy
- Levels set in GHG emissions
- Levels calculated based on prescriptive
Supporting Measures
- Supporting Certification Schemes
-
Codes Free to Access?
http://www.oib.or.at/RL6_061011.pdf