Around the world, engineers, architects and policymakers have been exploring ways to deliver highly efficient buildings whose reduced energy demand is satisfied by clean, renewable energy. Building off of the broader concept of a green or sustainable building, the concept of the “net zero building” focuses on the energy dynamics and performance of the building. And as policymakers and leaders align toward the net zero concept, the focus on achieving deep energy efficiency has centered on integrated technologies as well as ways to connect buildings to the natural environment.

This paper outlines the approach and the cost-effectiveness potential for designing and retrofitting residential buildings to be energy-efficient in Bahrain. The analysis is focused on residential buildings since these buildings consume over 48% of the total electricity used in Bahrain. The optimization analysis has the benefit to assess both at the individual building and the national building stock levels, the potential of the application of currently proven measures and technologies to improve the energy efficiency of the building sector in Bahrain.

This paper reviews the empirical literature that provides a correlation between the different barriers to energy efficiency and consumer behavior related to two domains. It evaluates behavior related to energy curtailment, which represents routine, repetitive effort to decrease consumption on a day-to-day basis. It also considers behavior related to investments, which are one time actions such as purchasing new energy efficiency technologies. The paper also reviews the existing literature that assesses the effect of policies on energy use and investment in energy efficiency technologies.

This project, “International Review of Residential Building Energy Efficiency Rating Schemes”, is the fifth project in a series of work conducted through the Building Energy Efficiency Task Group (BEET), under the International Partnership for Energy Efficiency Cooperation (IPEEC). This project report presents key governance and administrative considerations in the design of energy efficiency rating schemes, available information on the cost-effectiveness and market impact of rating schemes, barriers to uptake of schemes and lessons learned from the implementation of schemes.

This study compares and contrasts Australian and global best practices in policy and regulation for the energy and carbon performance of the built environment. It examines the drivers and opportunities for, and barriers to, the adoption of best practices in Australia. Finally, and as a stimulus to debate, it proposes a potential set of optimal measures, at national, state/territory and local levels, along with an indicative pathway for their implementation.

Energy efficiency policies have the unique capacity to contribute to a more sustainable energy future at an economic net benefit even when co-benefits are not included in the evaluations. The purpose of this paper is to present quantitative and comparative information on the societal cost-effectiveness and the lifetime energy savings of all light eight building energy efficiency policy instruments.

This report is the first report of the ‘Energy Savings 2030’-project which seeks to help the Coalition for Energy Savings to produce a robust and timely input to the 2030 policy discussion. It brings together and summarises recent empirical evidence on costs and benefits of energy efficiency measures. The evidence gap in terms of reliable ex-post data is well known. In the majority of cases results from ex-ante modelling studies inform the debate. The research carried out for this report confirms the persistent gap in publicly available ex-post evaluations of energy efficiency programmes.

The Energy Efficiency Financial Institutions Group (“EFFIG”) identifies the need to engage multiple stakeholder groups, scale-up the use of several financial instruments within a clear and enforced “carrot and stick” legislative framework. This report identifies a number of approaches and instruments that have proven to encourage investments and multiple market barriers that stand in the way of an energy efficient Europe.

The EU and Australia have instituted significant new public policies to promote energy efficiency in the “built environment.” Many of these public policies were motivated by the same concerns that led to the pioneering voluntary initiatives of Green Building Councils (especially the LEED design certification program) and the U.S. Department of Energy’s ENERGY STAR system for buildings. However, policy initiatives on both continents are relatively new, have been recently modified, and are yet to be finalized.

In 2009, the European Union adopted high-level goals for renewable energy, energy efficiency, and greenhouse gas reductions with targets set toward the year 2020. This was followed in 2012 by adoption of the Energy Efficiency Directive (EED) (2012/27/EU), which included as a major component a requirement for Member States to create Energy Efficiency Obligations Schemes (EEOSs) on energy companies or equivalent alternative measures, and those provisions have now been in effect for three years.

Global warming and environment problems caused by the excessive emission of greenhouse gases (GHGs), along with rapid economic development has attracted the attention of many countries and regions of the world. Reducing GHG emissions is essential to mitigate the threat of global warming. Household carbon (dioxide) emissions have been recognized as one of the most important contributors to climate change, with a significant impact on both the local and global environment, and various policy instruments have been implemented by governments to bring about the reduction.

Owing to the rapid urban growth of past decades, the refurbishment of buildings has become a central topic of city development. A key aspect of building renovations deals with energy saving, both for economic and environmental concerns. The present literature mainly focuses on technological solutions for buildings, and the related data are studied with descriptive statistics. Instead, this paper aims to evaluate the energy effectiveness of refurbishment interventions from a global sector viewpoint.

The German government has developed a variety of policy instruments intended to reduce national CO2 emissions. These instruments include a programme administered by KfW bank, which aims at improving the energy efficiency of buildings. It provides attractive credit conditions or subsidies to finance refurbishment measures which improve the energy efficiency of buildings significantly. The refurbishment programme leads to a reduction in energy use, which benefits private investors by reducing their energy bills.

Nowadays, energy efficiency (EE) is presented as a reliable strategy towards sustainable development, but its application has not been developed equitably worldwide, since most EE policies have been implemented in industrialised nations, and developing countries are still in the process of improving their EE levels.

This Annual Report covers the second in a 15-year plan and shows that the NEPP has continued to progress well. Throughout 2017, measures across the work plan have advanced and many have achieved significant outcomes. There has also been wider progress in energy policy and jurisdictional measures which will contribute strongly to energy productivity and NEPP objectives. This document highlights key outcomes, their expected impacts and links to broader reforms.

The National Energy Productivity Plan (NEPP) is a package of measures to improve Australia’s energy productivity by 40% between 2015 and 2030. The NEPP is delivered jointly between the Australian Government and the state and territory governments. Energy Ministers recognised that improving energy productivity helps: businesses reduce their energy costs through innovation and modernising their infrastructure; households benefit through lower energy bills and increased home comfort; Australia reduce its greenhouse emissions.

Green building councils, and the rating tools they operate, exist largely to provide clear market signals to consumers, industry and the government on green building claims. The relationship between green building councils, the rating tools, and the market is built on trust with the market depending that the information provided by green building councils, and their rating tools, is accurate and unbiased.