The Dutch Government stimulates the application of energy efficiency measures to reduce the energy requirements of buildings, which are responsible for about 20% of the Dutch CO2 emissions. For our assessment, we followed a qualitative approach, due to a lack of data. We reviewed the mix of policy instruments and used stakeholder surveys and interviews. We found that energy use is not very likely to decline fast enough to achieve the Dutch policy targets for 2020. For new buildings, the policy mix works well, but its contribution to the policy targets is limited.

This chapter examines the experience of construction unions and community organizations as they enter into strategic alliances to create new markets in energy efficient systems. I focus on two recent policy initiatives: PlaNYC for the retrofitting of public and commercial properties in New York City, and Green Jobs/Green New York (GJ/GNY) for the retrofitting of non-commercial residential properties in the rest of the city and the state.

This study compares and contrasts Australian and global best practices in policy and regulation for the energy and carbon performance of the built environment. It examines the drivers and opportunities for, and barriers to, the adoption of best practices in Australia. Finally, and as a stimulus to debate, it proposes a potential set of optimal measures, at national, state/territory and local levels, along with an indicative pathway for their implementation.

Global warming and environment problems caused by the excessive emission of greenhouse gases (GHGs), along with rapid economic development has attracted the attention of many countries and regions of the world. Reducing GHG emissions is essential to mitigate the threat of global warming. Household carbon (dioxide) emissions have been recognized as one of the most important contributors to climate change, with a significant impact on both the local and global environment, and various policy instruments have been implemented by governments to bring about the reduction.

Standards, subsidies, and carbon taxes are among the measures often considered to reduce energy consumption and carbon dioxide (CO₂) emissions in the buildings sector. Using a modeling system developed by the U.S. Energy Information Administration, residential and commercial sector standards and subsidies were each modeled with and without a carbon tax to determine if a multipolicy approach would be redundant. A separate case examining a carbon tax was also completed for comparison.

In this work, the literature about the relationship between thermal comfort and productivity in workplaces is reviewed and explored by means of a co-citation analysis—i.e., a factor analysis applied to the mutual citations of the most relevant contributions. A structure of three main clusters of papers describing the relationships between workers’ thermal comfort and productivity were identified according to the factor analysis and then confirmed with a multidimensional scaling.

Buildings are the largest energy consuming sector in the world. Accounting for over one-third of total final energy consumption, they are an equally important source of carbon dioxide (CO2) emissions. Achieving significant energy and emissions reduction in the buildings sector is a challenging but achievable policy goal. Transition to Sustainable Buildings presents detailed scenarios and strategies to 2050 and demonstrates how to reach deep energy and emissions reduction through a combination of best available technologies and intelligent public policy.

Nowadays, energy efficiency (EE) is presented as a reliable strategy towards sustainable development, but its application has not been developed equitably worldwide, since most EE policies have been implemented in industrialised nations, and developing countries are still in the process of improving their EE levels.

Concerns about climate change, energy security and energy productivity are driving countries to improve energy and thermal efficiency of their housing. Australia established a Nationwide House Energy Rating Scheme (NatHERS) in the mid-1990s to encourage improved energy performance, before regulating minimum energy standards in the 2000s. While minimum standards in Australia have improved, they fall short of requirements for a low carbon future. Resistance to new standards has been predicated on the argument that consumers will drive the market.

Cities are crucial sites for achieving socio-technical transitions in technology and infrastructure systems. Raising building energy efficiency (BEE) through new construction or retrofitting holds particular relevance to sustainability transitions since this requires diffusion of new technologies and energy management practices. In pursuit of this, city policymakers around the world are increasingly utilising mixes of multiple policy instruments.

The National Energy Productivity Plan (NEPP) is a package of measures to improve Australia’s energy productivity by 40% between 2015 and 2030. The NEPP is delivered jointly between the Australian Government and the state and territory governments. Energy Ministers recognised that improving energy productivity helps: businesses reduce their energy costs through innovation and modernising their infrastructure; households benefit through lower energy bills and increased home comfort; Australia reduce its greenhouse emissions.

This project, “International Review of Residential Building Energy Efficiency Rating Schemes”, is the fifth project in a series of work conducted through the Building Energy Efficiency Task Group (BEET), under the International Partnership for Energy Efficiency Cooperation (IPEEC). This project report presents key governance and administrative considerations in the design of energy efficiency rating schemes, available information on the cost-effectiveness and market impact of rating schemes, barriers to uptake of schemes and lessons learned from the implementation of schemes.

This document is a tool designed to help organizations and policymakers around the world craft their own Roadmaps—published documents that detail the economic, jobs, environmental and security benefits of doubling energy productivity—that clearly articulate a target date for doubling energy productivity and detail achievable policy recommendations necessary to achieving the goal. Clean energy markets around the world are undergoing a revolution as countries, companies and citizens seek paths to a prosperous economic future that also protect the environment.

Measures to reduce energy consumption and decrease CO2 emissions in the buildings sector have been on the political agenda for years. To support the efforts of both private and public property owners and in pursuit of carbon reduction policy goals, KfW has been promoting investment in energy saving and CO2 reduction since the beginning of the 1990s. These activities target an important element of the German Federal Government’s autumn 2010 energy concept [BMWi, 2010].

The review of policies being implemented in China, the EU, India and the US presented in this report has also identified some key challenges that we must address if we are going to realize the mitigation potential of the building sector. Chief among these is the need to improve our monitoring of the impact that our policies are having. Lack of measured and verifiable data on the influence of policies on building energy performance currently hampers our ability to assess and continuously improve their effectiveness.

The contribution of buildings to climate change has become widely acknowledged. On 3 December 2015, the United Nations Environment Programme (UNEP) held the first ‘buildings day’ at COP 21 (the UN Climate Change Conference) devoted to the decarbonization of the building stock. There are several forms of negative contributions that buildings make to climate change, but high on the list are embodied and operational energy demands, which largely depend on fossil fuels and result in greenhouse gas emissions.

A majority of carbon dioxide is emitted from cities. However, due to the complexity of urban energy consumption behaviour and lack of sufficient data, the influencing mechanisms of urban energy efficiency has not been fully understood. This paper presents a systematic study to identify the key energy efficiency drivers related with major urban performance aspects, such as R&D, livability, etc. First, the performance indicators of 25 global cities are collected from the Global Power City Index (GPCI) report and other data sources.